That seems like a rather simple job. But may I ask why you are using rod instead of tubing? That things gonna be heavy compared to tubing. --- On Thu, 3/10/11, Gerald Livingston <gerald.tcb@xxxxxxxxxxxxx> wrote: From: Gerald Livingston <gerald.tcb@xxxxxxxxxxxxx> Subject: [tcb] Camping accessory To: tcb@xxxxxxxxxxxxx Date: Thursday, March 10, 2011, 8:01 PM Some before and after pictures of (part of) the new camping accessory are at http://texasvolksbus.org/ctt/. <rant> I've discovered that NO ONE bends mild steel rod any more. I've called every fabrication shop in the area and they start talking about presses and too tight of a radius and blah blah blah. I need two pieces of 1/2" rod bent into neat, tight radius, ovals. 20 years ago a phone call would have Joe Bob the home fabricator setting up a jig on a plate of 1/4" steel and using a torch to hand bend the rod around a couple of 3" thick wall steel pipe sections. Now nobody wants to actually TOUCH the metal they're working on. </rant> G2