Hi Rob: All we have in the audio cue group is recycler, none, system volume information and audio. Does this help? Thanks! ******* MQ ******* ******* Home Page: http://mywebpages.comcast.net/mickeyqu ******* ----- Original Message ----- From: "ROB MEREDITH" <rmeredith@xxxxxxx> To: <studiorecorder@xxxxxxxxxxxxx> Sent: Wednesday, October 27, 2004 9:51 AM Subject: [studiorecorder] Re: sounds not playing when a save or copyiscomplete >I just figured out what might be the problem. Did your friend set the = > Audio Cues to Non? That would do it. All the completion sound is is cue 0. > = > Have your friend hit Alt+G and make sure something like Factory Default is > = > selected. > > Rob Meredith > >>>> mickeyqu@xxxxxxxxxxx 10/27/04 12:25PM >>> > iRob: > > Can this problem be aused by upgrading? my friend has studio recorder = > and=20 > did the update. He has the sound blaster ard, and windows xp. > > Thanks! > > ******* MQ=20 > ******* > ******* Home Page: http://mywebpages.comcast.net/mickeyqu ******* > ----- Original Message -----=20 > From: "ROB MEREDITH" <rmeredith@xxxxxxx> > To: <studiorecorder@xxxxxxxxxxxxx> > Sent: Wednesday, October 27, 2004 5:10 AM > Subject: [studiorecorder] Re: sounds not playing when a save or copy=20 > iscomplete > > >> The completion sound will not play if you are already playing something = > =3D >> with Studio Recorder, or if your sound card is busy. Under 2000/XP, your >> = > =3D >> sound card should never appear busy. >> >>>>> mickeyqu@xxxxxxxxxxx 10/26/04 08:33PM >>> >> >> ******* MQ=3D20 >> ******* >> ******* Home Page: http://mywebpages.comcast.net/mickeyqu *******Hello: >> >> What can cause the sounds not to play when a function is complete? >> >> Thanks! >> >> >> >> >>=20 > > > > >