[studiorecorder] Re: Question about scrubbing
- From: Rob Meredith <rmeredith@xxxxxxx>
- To: "studiorecorder@xxxxxxxxxxxxx" <studiorecorder@xxxxxxxxxxxxx>
- Date: Thu, 22 Mar 2012 14:20:23 -0400
Remember, you can go as low as 0.001 seconds on both the scrub move time and
the scrub play time. 1 millisecond is pretty short!
Rob
From: studiorecorder-bounce@xxxxxxxxxxxxx
[mailto:studiorecorder-bounce@xxxxxxxxxxxxx] On Behalf Of Neal Ewers
Sent: Thursday, March 22, 2012 2:03 PM
To: studiorecorder@xxxxxxxxxxxxx
Subject: [studiorecorder] Re: Question about scrubbing
Rob, I can't get as accurate with control left and right arrow even if I set
the scrub to 0.010 seconds. What I can do though, although it's strange, is to
insert a dummy file at the end of the file I am editing to make the entire file
long enough to cause the pixel scrub to be adjusted down to the level I want.
Thanks for the help.
Neal
From:
studiorecorder-bounce@xxxxxxxxxxxxx<mailto:studiorecorder-bounce@xxxxxxxxxxxxx>
[mailto:studiorecorder-bounce@xxxxxxxxxxxxx] On Behalf Of Rob Meredith
Sent: Thursday, March 22, 2012 12:14 PM
To: studiorecorder@xxxxxxxxxxxxx<mailto:studiorecorder@xxxxxxxxxxxxx>
Subject: [studiorecorder] Re: Question about scrubbing
Neal,
Remember, pixel scrubbing (done with left/right arrows) is not normal scrubbing
(done with Control and left/right arrows.) So, scrub settings do not apply when
the arrow keys are used in the wave view. What is happening is the zoom ratio
for short wave files is so low that one pixel does not represent much data. F10
doesn't help because you cannot zoom out beyond about half of the size of the
window. In other words, you are zoomed out as far out as possible already.
Recommendation: try Ctrl+Left Arrow and Ctrl+Right Arrow instead.
Rob
From:
studiorecorder-bounce@xxxxxxxxxxxxx<mailto:studiorecorder-bounce@xxxxxxxxxxxxx>
[mailto:studiorecorder-bounce@xxxxxxxxxxxxx]<mailto:[mailto:studiorecorder-bounce@xxxxxxxxxxxxx]>
On Behalf Of Neal Ewers
Sent: Thursday, March 22, 2012 11:31 AM
To: 'sr'
Subject: [studiorecorder] Question about scrubbing
Rob and others. Why is it that when I press the right and left arrow keys to
scrub in a wav file at 44.1, 16 bit, It scrubs the amount of the file I have
set in settings? However, if I am in, say a shorter, 30 second file and use
the arrow keys, the cursor hardly moves at all. I can press F10 until the
llamas come home, don't have any cows, but it doesn't seem to make any
difference. I have also tried shift F10 which doesn't seem to help. This is
in Windows 7 64 bit, and I don't remember having this at all in XP. What am I
experiencing here?
Thanks much.
Neal
P.S. Don't have any llamas either.
Other related posts:
