[studiorecorder] Re: How To Extract Out One Channel In A Stereo Recording
- From: "David Tanner" <David.Tanner@xxxxxxxxxxx>
- To: studiorecorder@xxxxxxxxxxxxx, Mika_Pyyhkala@xxxxxxx
- Date: Thu, 25 May 2006 20:54:23 -0500
Well, I am going to give you a simple answer that I might try, but
let me say that I have read Neal's response, and Rob's response.
So, my suggestion may not necessarily be the best, you would have to
see how the final result comes out, but it would seem to be the
easiest, if it works the way you want it to work.
Take your file and save it as a wav or MP3 file, whichever you
wish. Take it into Goldwave and resave it as a mono file. Goldwave
will let you take any file you have loaded into it and determine
mono or stereo, as well as sample rate, and file type in the save as
options. As soon as the file is saved it will ask if you want to
load the file in its' new format. If it works, and sounds the way
you want it to sound it will take you a lot less time. If you don't
have goldwave you can download it from www.goldwave.com. The trial
version will give you more than plenty time and functionallity to do
what you should need to do.
This is just one of the reasons I keep a number of sound editors on
my main system; sometimes there is a feature in one that just makes
things easier and simpler to do than they are with another. It
doesn't mean that I think any less of the others.
David Tanner
Rehabilitation Program Specialist 3
Assistive Technology Specialist
Assistive Technology Department
MN State Services f/t Blind
Office- 651-642-0795 Cell- 651-270-2233
Skype name: dtat100
>>> Mika_Pyyhkala@xxxxxxx 5/24/2006 12:47 PM >>>
Hi,
I recorded a presentation using an Iriver IFP899 in 96K stereo mp3,
and
now I have the file in Studeo Recorder.
One of the channels (right) side sounds very good, but the left
side you
can barely hear anything. Is there a way to extract the right
channel so
that I could use that one, and discard the poorer sounding left
channel.
FYI in the end a mono recording will be fine we don't need stereo
in the
final mp3 to be released.
Thank you,
Mika
BEGIN:VCARD
VERSION:2.1
X-GWTYPE:USER
FN:Tanner, David
TEL;WORK:651-642-0795
ORG:;SSB
TEL;PREF;FAX:651-649-5927
EMAIL;WORK;PREF;NGW:DTANNER@xxxxxxxxxxxxxxxxxxxxxxx
N:Tanner;David
TITLE:Rehab Tech Spec
END:VCARD
Other related posts:
