Do you mean that once we choose a default on these that this message box will not continue to appear? I thought I had screwed up a file from BCT because I just hit enter and let the file load and got nothing but white noise after the file was loaded. David Tanner Rehabilitation Program Specialist 3 Assistive Technology Specialist Assistive Technology Department MN State Services f/t Blind Office- 651-642-0795 Cell- 651-270-2233 Skype name: dtat100 >>> neal.ewers@xxxxxxxxxxxxxx 6/21/2006 11:19 PM >>> Steve, it sounds like for some reason, your default file options were reset. Try pressing Control M and you will find a dialog box that allows you to select the sample rate and bit rate. This should now be in force each time you open the program. Neal -----Original Message----- From: studiorecorder-bounce@xxxxxxxxxxxxx [mailto:studiorecorder-bounce@xxxxxxxxxxxxx] On Behalf Of Steve "The Jazz Man" Bauer Sent: Wednesday, June 21, 2006 10:16 PM To: studiorecorder@xxxxxxxxxxxxx Subject: [studiorecorder] Different Behavior on opening files Group: I find with the newest beta that when opening a file, an option screen automatically appears for selecting sample rate etc. Is there a way to make Studio Recorder behave like previous releases and not present this screen? It's a bit annoying, especially if you are use to opening a file and immediately want to do something in that file. Thanks. Steve Bauer http://www.jazznotes.net Host of: The Sunday Jazz Brunch KRBB (B98-FM) Sunday 9 a.m. to 12 noon http://www.b98fm.com Smooth Jazz USA Tuesday 23:00 Hours universal 6 p.m. central http://interactive.acbradio.org
BEGIN:VCARD VERSION:2.1 X-GWTYPE:USER FN:Tanner, David TEL;WORK:651-642-0795 ORG:;SSB TEL;PREF;FAX:651-649-5927 EMAIL;WORK;PREF;NGW:DTANNER@xxxxxxxxxxxxxxxxxxxxxxx N:Tanner;David TITLE:Rehab Tech Spec END:VCARD