[studiorecorder] Re: Demo of my control key arrow key problem

  • From: Rob Meredith <rmeredith@xxxxxxx>
  • To: "studiorecorder@xxxxxxxxxxxxx" <studiorecorder@xxxxxxxxxxxxx>
  • Date: Tue, 30 Aug 2016 15:13:43 +0000

If you prefer to use your old way, you can hit X (capital X) to toggle looping 
of pixel scrubbing. The down side is you need to hit Escape or F4 to stop it.

Rob

From: studiorecorder-bounce@xxxxxxxxxxxxx 
[mailto:studiorecorder-bounce@xxxxxxxxxxxxx] On Behalf Of Neal Ewers
Sent: Tuesday, August 30, 2016 11:11 AM
To: studiorecorder@xxxxxxxxxxxxx
Subject: [studiorecorder] Re: Demo of my control key arrow key problem

Rob. No wonder you are King of SR and surrounding territories. That works like 
a charm. Thank you, sir. I did try increasing both parameters, and I got 
further away from the sound I wanted. 0.02 works like a charm when both times 
are set to it. It is also easier to hear where you are in the word than simply 
using the arrow keys because the control modifier causes it to loop. Oh, and by 
the way, I did this with JAWS on and I used the arrow keys with control. So, we 
can squash that myth. Of course, older versions of JAWS may still have the 
problem.

Thanks for the magic solution.

Neal

From: 
studiorecorder-bounce@xxxxxxxxxxxxx<mailto:studiorecorder-bounce@xxxxxxxxxxxxx
[mailto:studiorecorder-bounce@xxxxxxxxxxxxx] On Behalf Of Rob Meredith
Sent: Tuesday, August 30, 2016 9:53 AM
To: studiorecorder@xxxxxxxxxxxxx<mailto:studiorecorder@xxxxxxxxxxxxx>
Subject: [studiorecorder] Re: Demo of my control key arrow key problem

Neal, simple solution. Try setting your Scrub Move Time and Scrub Play Time to 
the same value. You might try 0.02 for each as a start.

Rob


From: 
studiorecorder-bounce@xxxxxxxxxxxxx<mailto:studiorecorder-bounce@xxxxxxxxxxxxx
[mailto:studiorecorder-bounce@xxxxxxxxxxxxx] On Behalf Of Neal Ewers
Sent: Tuesday, August 30, 2016 10:41 AM
To: 'sr' <studiorecorder@xxxxxxxxxxxxx<mailto:studiorecorder@xxxxxxxxxxxxx>>
Subject: [studiorecorder] Demo of my control key arrow key problem

Hi all. Here is a demo I recorded without JAWS running of the problem I am 
trying to explain and answer with regard to using the control as a modifier key 
to the arrow keys or F11 and F12. Any suggestions how I get this to work better 
would be appreciated. Here is the link.

https://dl.dropboxusercontent.com/u/10881362/sr-demo.mp3

Neal

Other related posts: