[sib-access] Re: can't get plug-in to run
- From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
- To: <sib-access@xxxxxxxxxxxxx>
- Date: Mon, 19 Oct 2009 20:17:41 -0400
The scripts are running. I have them in both jaws 10 and 11.
Gord
----- Original Message -----
From: "Dave Carlson" <dgcarlson@xxxxxxxxxxxxx>
To: <sib-access@xxxxxxxxxxxxx>
Sent: Monday, October 19, 2009 4:44 PM
Subject: [sib-access] Re: can't get plug-in to run
Gordon,
Are you sure you copied the JAWS scripts to the correct folder? Don't know
what else it could be.
Dave
----- Original Message -----
From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
To: <sib-access@xxxxxxxxxxxxx>
Sent: Monday, October 19, 2009 12:18
Subject: [sib-access] can't get plug-in to run
Hello.
I have installed sib 5.2 and done all the necessary steps to get sib access
rc1 installed. I can't get the access plug-in to run, even after checking
the keyboard shortcuts in both sibelius and jaws keymap. I have tried it
under both jaws 10 and 11. Do you have any other ideas? I did rerun the
reg keys and all that. Using a desktop layout.
Thanks
Gord
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
Other related posts:
