Gordon, I had a similar problem. Is it possible that you didn't install the Sibelius files in the correct location? I had installed the Sibelius folder under All Users, but when I copied it to the folder under my user name, it worked. You might want to double check where you copied the Sibelius folder. Just a suggestion. Justin Kauflin http://www.justinkauflin.com 757-630-6329 -------------------------------------------------- From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx> Sent: Monday, October 19, 2009 8:17 PM To: <sib-access@xxxxxxxxxxxxx> Subject: [sib-access] Re: can't get plug-in to run > The scripts are running. I have them in both jaws 10 and 11. > Gord > ----- Original Message ----- > From: "Dave Carlson" <dgcarlson@xxxxxxxxxxxxx> > To: <sib-access@xxxxxxxxxxxxx> > Sent: Monday, October 19, 2009 4:44 PM > Subject: [sib-access] Re: can't get plug-in to run > > > Gordon, > > Are you sure you copied the JAWS scripts to the correct folder? Don't know > what else it could be. > > Dave > > ----- Original Message ----- > From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx> > To: <sib-access@xxxxxxxxxxxxx> > Sent: Monday, October 19, 2009 12:18 > Subject: [sib-access] can't get plug-in to run > > > Hello. > I have installed sib 5.2 and done all the necessary steps to get sib > access > rc1 installed. I can't get the access plug-in to run, even after checking > the keyboard shortcuts in both sibelius and jaws keymap. I have tried it > under both jaws 10 and 11. Do you have any other ideas? I did rerun the > reg keys and all that. Using a desktop layout. > Thanks > Gord > If you wish to unsubscribe, send a blank message > with the single word, unsubscribe - in the Subject line to: > sib-access-request@xxxxxxxxxxxxx > > If you wish to unsubscribe, send a blank message > with the single word, unsubscribe - in the Subject line to: > sib-access-request@xxxxxxxxxxxxx > > If you wish to unsubscribe, send a blank message > with the single word, unsubscribe - in the Subject line to: > sib-access-request@xxxxxxxxxxxxx > If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx