[sib-access] Re: Newbie question
- From: "Dan Rugman" <sib-access@xxxxxxxxxxxxxxxxx>
- To: <sib-access@xxxxxxxxxxxxx>
- Date: Tue, 23 Sep 2008 20:25:39 +0100
Chris,
JAWS+Q should say "Sibelius Access settings are loaded". If you're hearing
"Default settings" then the scripts haven't been loaded, unless something
very strange is going on.
A couple of things to try:
1. Go to Start > Programs > JAWS (X) > Explore JAWS > Explore Shared
Settings
And check that the Sibelius scripts are there.
If you have multiple versions of JAWS, make sure that you check the version
of JAWS which you use with Sibelius.
2. Check that you are running Sibelius 5.2.
Hope this helps,
Dan Rugman
Visit www.musicaccess.co.uk
The new on-line resource for visually impaired musicians and home of
Sibelius Access.
-----Original Message-----
From: sib-access-bounce@xxxxxxxxxxxxx
[mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Chris Smart
Sent: 23 September 2008 19:51
To: sib-access@xxxxxxxxxxxxx
Subject: [sib-access] Newbie question
Hi Dan and others,
Is it normal for me to hear "default settings" when I press JawsKey plus Q
while in Sibelius? Shouldn't it identify that I'm running Sib Access?
Chris
If you wish to unsubscribe, send a blank message with the single word,
unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
Other related posts:
