[sib-access] Re: How do I check for Missing Annotations after XML Import?
- From: "Farfar Carlson" <dgcarlson@xxxxxxxxxxxxx>
- To: <sib-access@xxxxxxxxxxxxx>
- Date: Mon, 20 May 2013 21:12:21 -0700
Dani,
Upon further rumination, I think you may also be able to find those accents
and annotations. Again after you select everything, your friend is the
filter menu under edit. In this case, look at the notes and rests and then
look at the various subtypes offered. They may help.
Dave Carlson
Tastefully composed and launched near the Pacific Ocean using a Dell
Latitude E6520, JAWS 14, and Windows 7 Professional 32-bit
----- Original Message -----
From: "Dani L Pagador" <axs.brl@xxxxxxxxx>
To: <sib-access@xxxxxxxxxxxxx>
Sent: Monday, May 20, 2013 17:29
Subject: [sib-access] Re: How do I check for Missing Annotations after XML
Import?
Hi, Dave.
I've got to do a sweep through for chord symbols, accents, and dynamics.
I've got 10 staves to work through.
Thanks,
Dani
-----Original Message-----
From: sib-access-bounce@xxxxxxxxxxxxx
[mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Farfar Carlson
Sent: Monday, May 20, 2013 3:45 AM
To: sib-access@xxxxxxxxxxxxx
Subject: [sib-access] Re: How do I check for Missing Annotations after XML
Import?
Dani,
Good luck on that. You'll need to tab through laboriously to make sure that
representative elements show up.
What specifically were you hoping to locate?
Dave Carlson
Tastefully composed and launched near the Pacific Ocean using a Dell
Latitude E6520, JAWS 14, and Windows 7 Professional 32-bit
----- Original Message -----
From: "Dani L Pagador" <axs.brl@xxxxxxxxx>
To: <sib-access@xxxxxxxxxxxxx>
Sent: Monday, May 20, 2013 01:18
Subject: [sib-access] How do I check for Missing Annotations after XML
Import?
Hi, Everyone.
I used Lime to write out my midterm project, and am importing the piece to
Sibelius to work on the drum map for my Berklee course.
I know that things get lost in the move, and need to know what keystrokes to
use to sweep through the piece to see what needs to be added back in.
TIA for any help,
Dani
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
Other related posts:
