Dan, This is something of a Sibelius deficiency. Remember that I was talking last night about the seeming inability to navigate to a place where a wrong note had been played in an otherwise successful Flexi-Time performance. Apparently, the best way to do that is to do the following: 1. When you hear your mistake, stop Flexi-Time with the space bar. 2. Press CTRL F6 to learn the stop point of playback in bars and beats. 3. Press F6 to learn where your selection insertion point is. 4. Use the Alt E B command to go to bar. This will put you in the beginning of the bar where your mistake happened. 4. arrow to the desired wrong note and alter as desired. It would be cool if it were easier to get to the bogus note but.. Also remember that if you r note is in a voice other than 1, you'll need to shift alt down arrow tot hat voice. Also remember that when you are on a chord, moving between voices always moves you to the downbeat of 1 in that bar for that voice. Kevin If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx