Dan, Appreciate any efforts at all. Sad that Sibelius did such nasty things to the mixer. It's as though they are making the mixer look like a track-sequencing program like Sonar. I recall that in Sib 3 we were able to assign the MIDI port in the instruments dialog as well. Did they take that away in Sib 5? Dave ----- Original Message ----- From: "Dan Rugman" <sib-access@xxxxxxxxxxxxxxxxx> To: <sib-access@xxxxxxxxxxxxx> Sent: December 16, 2008 9:22 AM Subject: [sib-access] Re: Accessing mixer Dave, I've spent a lot of time picking the mixer apart and it's not an easy interface to manipulate. It all has to be done through clicking and dragging. The other problem is that JAWS has to do a lot of detective work to figure out which controls are available. The whole thing is made more complicated by the way in which the windows in the mixer keep shifting around. It's a bit like trying to build a house on quick sand. The strips in the mixer are normally shown in a collapsed state but they can be expanded to show more controls. Once expanded, a lot of extra controls become available but some of these will open windows that we can't interact with at all, like the dreaded Kontakt player. One of the reasons why I've been looking at the mixer again is to open the way for further developments but at the moment all I've done is rework the current controls. It may be that extended mixer support comes in a later release but at present, I have to focus on sorting out the things which are not working as advertised so that I can get beta 2 out ASAP. Dan Rugman visit the new on-line resource for visually impaired musicians and home of Sibelius Access. www.musicaccess.co.uk -----Original Message----- From: sib-access-bounce@xxxxxxxxxxxxx [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Carlson Sent: 16 December 2008 16:10 To: sib-access@xxxxxxxxxxxxx Subject: [sib-access] Re: Accessing mixer Dan, Is there any way we can get the capability to change the synth/instrument (i.e. MIDI port and channel) being used on a particular stave? If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx