Is it a frequency domain simulation or transient simulation. The causes are likely to be non-causal S-par and/or no DC data in your S-par. saoer Mohamad Haghtalab wrote: > > Hi all > I have a design in Nexxim(ansoft designer) in which there is both S-parameter > and Spice models blocks,s parameter blocks all have one port named 'ref ' ,I > connect all these ports to ground in shematic,if all models were S parameter > when simulating the design we dont have any error ,but if we add a spice > model (e.g. LNA model) we have error in simulation > (DC continuation...),the problem seems to be the refrence of spice > model(?),can you help me about that? > > Regards > > Haghtalab > > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List technical documents are available at: > http://www.si-list.net > > List archives are viewable at: > //www.freelists.org/archives/si-list > or at our remote archives: > http://groups.yahoo.com/group/si-list/messages > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu