[SI-LIST] Re: random vectors

  • From: Ed Sayre III <esayre3@xxxxxxxx>
  • To: yonitz@xxxxxxxxxxxxx, <si-list@xxxxxxxxxxxxx>
  • Date: Wed, 05 Feb 2003 13:03:53 -0500

Hello Yoni,
   I do not believe you can do this directly. Although, you can create a 
pseudo-random bit stream to drive a 1 volt piecewise linear voltage 
source.  Then drive your circuit with a dependant source that the piecewise 
source controls and scale the voltage to the appropriate I/O level.  I have 
seen this method used by a number of SPICE users.

Good luck
         -Ed Sayre 3rd
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

               NORTH EAST SYSTEMS ASSOCIATES, INC
                             ------------------------------------- 

                         "High Performance Engineering & Design"
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  Dr. Edward Sayre 3rd            e-mail: esayre3@xxxxxxxx
  NESA, Inc.                              http://www.nesa.com/
  5 Lan Drive, Suite 200          Tel  +1.978.392-8787 x 218
  Westford, MA 01886 USA       Fax +1.978.392-8686
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~




At 07:38 PM 2/5/2003 +0200, you wrote:

>hi,
>can Hspice create a random vector of zeros and ones pulses?
>
>Yonatan (Yoni) Tzafrir
>*Tel:               (972) - 3 - 7552300 (T/L: 351)
>*Fax:          (972) - 3  - 6177130
>   *Mobile:       (972) -54- 459469
>*E-mail:       <mailto:yonitz@xxxxxxxxxxxxx>
>
>
>------------------------------------------------------------------
>To unsubscribe from si-list:
>si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
>or to administer your membership from a web page, go to:
>//www.freelists.org/webpage/si-list
>
>For help:
>si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>List archives are viewable at:
>                 //www.freelists.org/archives/si-list
>or at our remote archives:
>                 http://groups.yahoo.com/group/si-list/messages
>Old (prior to June 6, 2001) list archives are viewable at:
>                 http://www.qsl.net/wb6tpu
>

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                //www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: