[SI-LIST] power/ground connection
- From: "Pras venki" <venki.pras@xxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Tue, 10 Jul 2007 14:10:39 -0700
Hello everyone,
I m trying to simulate crosstalk, SSN on my package model.
Now when I m connecting the spice's ideal power supply to my package, I
connect it between the ball end of the supply net and the ground net. Also
then I short the ball end of the ground net to ground. Is this setup right?
Coz ppl when they talk abt power/gnd nets, they talk of them in pairs but
here I m having two separate voltage waveforms - one at Vcc and then the
other at 0V, which is how I look at it.
Regards,
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
