i think it is not SI or EMI issue.
if you can layout it as 1inch, SI and EMI is OK.
Tesla
At 2015-12-10 17:16:45, "Chambers yin" <chambers.yin@xxxxxxxxx> wrote:
Is it related to EMI instead of SI?------------------------------------------------------------------
On Tue, Dec 8, 2015 at 7:53 PM, Chambers yin <chambers.yin@xxxxxxxxx> wrote:
Hi experts,
As we know, there are two kinds of applications for DDR, one is SDRAM on
board, and another is DIMM. In the most of routing guide for DIMM, there is
min trace length requirement, e.g. more than 2inch or 1inch, but there is
no same requirement for SDRAM. Why?
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu