Reminder
Well, it's that time for another installment in our summer Covid-19 webinar
series. I've been working on my presentation for the last week, and it will be
done and ready in a few hours, just in time for the presentation tomorrow on:
Corner Bends
Presented by: Scott McMorrow
Thursday, August 13
11:15 a.m. PT | 2:15 p.m. ET
As system data rates become progressively faster, the difficulty of designing
high-margin becomes more difficult each year. There are many misconceptions
about the signal integrity implications of corner bends in high performance PCB
designs. In this webinar, we will perform 3D electromagnetic investigations of
individual and serpentine, single-ended and differential corners, to determine
layout requirements for multiple data rate regimes. Clear guidance will be
provided for both production and precision measurement board designs.
https://samtec.zoom.us/webinar/register/7415906932012/WN_Jqx5zanaRzSFc1KPurAgWA<https://samtec.zoom.us/webinar/register/7415906932012/WN_Jqx5zanaRzSFc1KPurAgWA>
Future Sessions:
Aug 27 | High-Speed Connector SI Roundup: Strengths, Weaknesses and Trade-offs
| John Abbott
Sept 10 | Noise and Simulation Correlation | Rich Mellitz
Scott McMorrow, CTO Signal Integrity Group
Samtec
Office 401-284-1827 | +1-800-726-8329
www.samtec.com<http://www.samtec.com/>
Scott McMorrow,
Office: 401-284-1827
www.samtec.com
This email and any appended documents are only for the intended person/entity
and may contain information of Samtec, Inc., that is PRIVILEGED, PROPRIETARY,
CONFIDENTIAL, AND/OR PROTECTED BY LAW. If you are not the intended recipient
you are hereby notified that any dissemination, disclosure, use or copying of
this email or its contents is prohibited. If you this message in error, please
notify Samtec immediately and delete the email, attachments and all copies. The
intended recipient should not disclose the content to third parties or
reproduce the content without Samtec's written consent.
delete the email, attachments and all copies. The intended recipient should not
disclose the content to third parties or reproduce the content without Samtec's
written consent.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list<//www.freelists.org/webpage/si-list>
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list<http://tech.groups.yahoo.com/group/si-list>
List archives are viewable at:
//www.freelists.org/archives/si-list<//www.freelists.org/archives/si-list>
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu<http://www.qsl.net/wb6tpu>
Scott McMorrow,
Office: 401-284-1827
www.samtec.com
This email and any appended documents are only for the intended person/entity
and may contain information of Samtec, Inc., that is PRIVILEGED, PROPRIETARY,
CONFIDENTIAL, AND/OR PROTECTED BY LAW. If you are not the intended recipient
you are hereby notified that any dissemination, disclosure, use or copying of
this email or its contents is prohibited. If you this message in error, please
notify Samtec immediately and delete the email, attachments and all copies. The
intended recipient should not disclose the content to third parties or
reproduce the content without Samtec's written consent.
delete the email, attachments and all copies. The intended recipient should
not disclose the content to third parties or reproduce the content without
Samtec's written consent.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
