HI there KEN, Thanks. Actually Im trying to simulate bus signal. I have already assigned IBIS models (from maker) to components. I have configured SET-UP ADvisor and simulate through probe, clicking net then extracting them to sigexplorer then after changing settings I then simulated. But this is just for one data signal. How will I be able to simulate the bus signal all together? regards, RACE ----- Original Message ----- From: "Ken Holman" <kholman@xxxxxxxxxxxx> To: <rrepollo@xxxxxxxxxxxxxxxx> Sent: Thursday, April 07, 2005 7:43 PM Subject: RE: [SI-LIST] Re: creating an IBIS model... RACE, I'm not quite sure what you mean by batch simulations. Are you just trying to launch simulations from the command line rather than the gui? Or are you trying to run many corner cases without having to launch a new simulation for each case? I have found that the documentation cadence provides for SpecctraQuest, now referred to as PCB SI, is really quite good. The hard part is finding the appropriate document. Have you looked in the Simulation and Analysis Reference Manual? If not you can find it in your Cadence directory under \doc\simref. If you clarify your question a bit I may be able to point you in the right direction. Ken Holman -----Original Message----- From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On Behalf Of race Sent: Thursday, April 07, 2005 4:05 AM To: lgreen22@xxxxxxxxxxxxxx; zhang__feng@xxxxxxxx; si-list@xxxxxxxxxxxxx; si-list-bounce@xxxxxxxxxxxxx Subject: [SI-LIST] Re: creating an IBIS model... Hi there! Good day! Can anyone help us on how to do batch simulations on specctra quest? Actually we are trying to simulate data and address bus by batch simulation. Any help is really appreciated. THanks. Best regards RACE ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu -------------------------------------------------------- This email message and any files transmitted with it contain confidential information intended only for the person(s) to whom this email message is addressed. If you have received this email message in error, please notify the sender immediately by telephone or email and destroy the original message without making a copy. Thank you. ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu