Whether this will be difficult or not really depends on additional constraints: What edge rates? Parallel single-ended or serial differential signals, and how many, and how many can switch simultaneously with what edge rate, and what kind of power bypass is in the package and on the die, what kind of PCB the chip is intended to mate up to etc. Steve On 11/8/2011 7:22 PM, Devis.Lu@xxxxxxxxxxxxx wrote: > Hello Everyone > Our customer want to design 1 logic BGA package(around 400 balls) which > operate around 1GHZ-2GHZ frequency. Does anyone have experience in design > such a kind of package in wirebond process without SI issues? > Thanks. > > > > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List technical documents are available at: > http://www.si-list.net > > List archives are viewable at: > //www.freelists.org/archives/si-list > > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > -- Steve Weir IPBLOX, LLC 150 N. Center St. #211 Reno, NV 89501 www.ipblox.com (775) 299-4236 Business (866) 675-4630 Toll-free (707) 780-1951 Fax ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu