I have been asked to replace Tantalum bulk capacitor in a design with a suitable Ceramic capacitor. The Ceramic capacitor is X5R type, which I believe is more stable than Y5V. However, its voltage rating being 6.3V, I am not feeling very comfortable to use it in the 5V application. Can anyone advise me about the minimum voltage rating I should have for a bulk Ceramic capacitor in a 5V application. Regards, Ravinder PCB Development and Design Department IBM Corporation Email: ajmani@xxxxxxxxxx *************************************************************************** Always do right. This will gratify some people and astonish the rest. .... Mark Twain ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list Old list archives are viewable at: http://www.qsl.net/wb6tpu