Thanks for the idea, but that does not seem to be what I am after - I would like to include an impulse response from a file in my transient simulations. So far, I know I can convert it to an S-parameter box - I was wondering if there is a more elegant method. Thanks, Pavle On Tue, Jun 1, 2010 at 12:24 PM, Lingyun Wang <lingyunwang@xxxxxxxxx> wrote: > Open Data Display window: > > --->Tools--->Front Panel--->SP TDR > > On Tue, Jun 1, 2010 at 11:44 AM, Pavle Milosevic <pavle@xxxxxxxxxxxxxx> > wrote: > > Hello all, > > I would like to know what is the preferred method of using the impulse > > response data (either produced by ADS ImpulseWriter, or from some other > > source) in Agilent ADS transient (Analog/RF Network, not DSP) > simulations. > > > > Is there something analogous to the S-parameter box, that can just be > > inserted directly, or is there a more convoluted (or should I say > convolved) > > method? I know a while ago Agilent was mentioning an ImpulseReader > component > > to be implemented in the future, but it does not seem to be available in > > ADS2009 Update1... > > > > Thanks, > > > > Pavle Milosevic > > University of Illinois at Urbana-Champaign > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu