Hi All, I have below query, it would be greatly appreciated if you can provide me with some info. on this. Is it possible to generate a model for USB? Is there any the equivalent electrical model of USB cable model for USB2.0 transceiver? If not, is it possible to generate a model for USB cable for stimulating standing wave phenonmena such as reflected-wave effect, bounce back effect, propogation delay, eye diagram and jitter in any spice simulator? Thanks, Mukul ____________________________________________________________________________________ Park yourself in front of a world of choices in alternative vehicles. Visit the Yahoo! Auto Green Center. http://autos.yahoo.com/green_center/ ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu