[SI-LIST] Two layer board impedance calculation
- From: Goutham.S@xxxxxxxxxx
- To: si-list@xxxxxxxxxxxxx
- Date: Wed, 15 May 2002 16:04:00 +0630
Hi,
I am designing a two layer PCB. There is no continuous plane.
How to calculate differential trace impedance, can any one suggest?
My requirement is 100ohm differential impedance and 63mil board height.
Regards
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
