[SI-LIST] Suggestions for modeling a loaded TEM cell?
- From: "Brent DeWitt" <bdewitt@xxxxxxxxxxxxx>
- To: "SI List" <si-list@xxxxxxxxxxxxx>
- Date: Fri, 19 Nov 2004 19:00:01 -0800
Anyone have any suggestions for modeling programs (preferably open
source/free) for modeling the introduction of EUTs of various
sizes/compositions into a TEM cell of known geometry? I'm expecting this is
best done with an FDTD code like LC or a hybrid code of some sort.
Your wisdom is appreciated!
With respect,
Brent G DeWitt
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
- » [SI-LIST] Suggestions for modeling a loaded TEM cell?
