Hi Dan, You can get the parasitic parameters in Allegro. 1.Display -- parasitic 2.Select Clines in Find 3.Click the target trace,and you will get the parasitic parameters Wayne ======= 2011-05-05 03:56:50 :======= >Hi All, > i have a power trace in which i need to caluclate the parasitic resistance >and inductance between the load and decap. could anyone help me how can i >find the parasitic resistance and inductance in a trace? >Thank You >Mani > > >------------------------------------------------------------------ >To unsubscribe from si-list: >si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > >or to administer your membership from a web page, go to: >//www.freelists.org/webpage/si-list > >For help: >si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > >List technical documents are available at: > http://www.si-list.net > >List archives are viewable at: > //www.freelists.org/archives/si-list > >Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > = = = = = = = = = = = = = = = = = = = = 致 礼! zhw zhw@xxxxxxxxxx 2011-05-05 ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu