Hi All, Good Morning!!! I am working on Production test system. In this we are running Pulse mask test on E1 signal coming out from the Unit under test using PUMA E1 analyzer. By running pulse mask test we can find out components disassembly and impedance mismatch in the E1 signal transmission line. Please give your comments on above test setup. My questions: 1. After running pulse mask test, is it require to run Return loss test to verify impedance mismatch? 2. Pulse mask test will take care of impedance mismatch in the transmission. Is it correct? 3. Is there any simple method to do return loss measurement? Or what is the test equipment and test setup required for return loss? 4. Please give your thought on Return loss measurement. Thanks in advance of your replies. Regards, Arun Kumar ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu