Hello Experts,
If you don't mind, I need a small help from you regarding Peak transient
current calculation.
When we are doing AC coupling analysis (decoupling analysis), as we know that,
Zotarget formulae =VDD (V)*ripple (%)/Peak transient Current(A). So, here I did
one calculation for the same with some assumptions as follow below.
Example:
Inputs: VDD=1V, 3% ripple=.003,Imax, Peak transient current=?, since I don't
have peak transient current details, I am calculating theoretically i.e.,
0.5*Imax. I did some calculation as follow below. Then, for our case Peak
transient current would be 0.5*1A==0.5A.
The main concern is that, When we are applying/feeding inputs to the simulation
environment (EDA tools), whether we need to feed just 0.5A as peak transient
current or Imax+ peak transient current, i.e. 1A+0.5A=1.5A as peak transient
current? Can you please help me and give more technical information's on this?
Thanks,
Naveenchandra V
M +91-7760746060,
The information contained in this electronic message and any attachments to
this message are intended for the exclusive use of the addressee(s) and may
contain proprietary, confidential or privileged information. If you are not the
intended recipient, you should not disseminate, distribute or copy this e-mail.
Please notify the sender immediately and destroy all copies of this message and
any attachments. WARNING: Computer viruses can be transmitted via email. The
recipient should check this email and any attachments for the presence of
viruses. The company accepts no liability for any damage caused by any virus
transmitted by this email. www.wipro.com
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
