[SI-LIST] RJ-45 Connector

  • From: "Chandupcb" <chandupcb@xxxxxxxxx>
  • To: <si-list@xxxxxxxxxxxxx>
  • Date: Fri, 9 Jun 2006 16:12:53 +0530

Hi Gurus,
May I know why will we remove the Plane  under the RJ-45 connector.Some times 
only chasis gnd is Allowed under the connector.

Why?

Regards
Chandu
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                //www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: