[SI-LIST] Re: Power Rail Measurement

  • From: agathon <hreidmarkailen@xxxxxxxxx>
  • To: dmarc-noreply@xxxxxxxxxxxxx
  • Date: Sat, 27 Jun 2020 16:02:40 -0400

https://www.amazon.com/Power
-Integrity-Optimizing-Troubleshooting-Electronics/dp/0071830995/

Power Integrity: Measuring, Optimizing, and Troubleshooting Power Related
Parameters in Electronics Systems 1st Edition


On Thu, May 7, 2020 at 3:33 PM Cosmin Iorga <dmarc-noreply@xxxxxxxxxxxxx>
wrote:

Hi Mina,
for your question about measuring the impedance plot of the PDN you can
also try the PIScanner tool if the PDN powers an FPGA. For documentation
and examples of measuring supply rails ripple, pk-pk, overshoot,
undershoot... you can take a look at the application note "Power Integrity
Effects on Signal Integrity in FPGA Systems" in the support section of the
website linked below.
Regards,
Cosmin
http://www.piscanner.com



     On Thursday, May 7, 2020, 10:49:22 AM GMT-8, Yours Technically <
yourstechnically.yt@xxxxxxxxx> wrote:

 Hi si-listers,
I am a newbie in power rail measurements.
Can you help me start with the documents to be read?
Formulating the test procedure, arriving at the test equipment, probes.
If you have any related document, please share with me.
I hope the only measurables are Ripple_ peak to peak, and overshoot,
undershoot from the transient.
How can we measure the impedance plot of PDN?
We might have to probe at the single pin which is different from the
simulations in which we are grouping the pins and plotting the
impedance curve.
Kindly share your insights

Regards,
Mina


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List forum  is accessible at:
              http://tech.groups.yahoo.com/group/si-list

List archives are viewable at:
        //www.freelists.org/archives/si-list

Old (prior to June 6, 2001) list archives are viewable at:
         http://www.qsl.net/wb6tpu



------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List forum  is accessible at:
               http://tech.groups.yahoo.com/group/si-list

List archives are viewable at:
                //www.freelists.org/archives/si-list

Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu





------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List forum  is accessible at:
               http://tech.groups.yahoo.com/group/si-list

List archives are viewable at:     
                //www.freelists.org/archives/si-list
 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: