Hello Gurus 10:1 Capacitive-input probes has a 10Mohm series resistance at probe tip. What is the purpose of the resistor? The answers that I have in my mind are:1) to be able to measure high DC voltage2) so that the input capacitive loading is small3) to minimize the loading that the cable capacitance would impose on the DUT Am I right about? RegardsYing ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu