PCI board spec in connector area is 1.57 +/- .20mm -Ivor Sankar karuppannan wrote: > HI, > In my project i am using PCI board. What is the minimum thickness of the > PCI board? Because our fab guy made the board 1.24mm thickness. > > Regards, > Sankar.K > Wipro Technologies, > 72, Electronics City, Hosur Main Road, > Bangalore-561229. > Ph:+91-80-8520408 Extn: 4012/4031. > > > **************************Disclaimer************************************ > > Information contained in this E-MAIL being proprietary to Wipro Limited is > 'privileged' and 'confidential' and intended for use only by the individual > or entity to which it is addressed. You are notified that any use, copying > or dissemination of the information contained in the E-MAIL in any manner > whatsoever is strictly prohibited. > > *************************************************************************** > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > List archives are viewable at: > //www.freelists.org/archives/si-list > or at our remote archives: > http://groups.yahoo.com/group/si-list/messages > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu