[SI-LIST] PCI Edge connector
- From: "Sankar karuppannan" <sankar.karuppannan@xxxxxxxxx>
- To: <si-list@xxxxxxxxxxxxx>
- Date: Mon, 24 Mar 2003 22:35:21 +0530
HI,
In my project i am using PCI board. What is the minimum thickness of the
PCI board? Because our fab guy made the board 1.24mm thickness.
Regards,
Sankar.K
Wipro Technologies,
72, Electronics City, Hosur Main Road,
Bangalore-561229.
Ph:+91-80-8520408 Extn: 4012/4031.
**************************Disclaimer************************************
Information contained in this E-MAIL being proprietary to Wipro Limited is
'privileged' and 'confidential' and intended for use only by the individual
or entity to which it is addressed. You are notified that any use, copying
or dissemination of the information contained in the E-MAIL in any manner
whatsoever is strictly prohibited.
***************************************************************************
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
