Hi All, I have a Board that is currently being routed and I'm not sure how to handle ringing on my PCI bus (50Mhz 3.3V). Here's the stats: 1. Xmission lines are 50 Ohms 2. Three devices on PCI bus The current placement of the three components gives me Manhattan distances of 10" and 3.7" A =============================== B =========== C <------- 10" -------> <-- 3.7" --> I don't have much flexibility regarding the component placement. And when component B is driving, my simulations show me that component A is seeing excessive overshoot and ringback(~5.5V with almost No Noise Margin). My understanding of PCI, is that I cannot use any terminations. Is there anything that can be done? Thanks in advance Simba Julian ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu