All, I teach a microwave class for undergrads and I have the opportunity to support a project whereby my student can design, fabricate, and test a simple distributed circuit. The idea is to give them some hands-on experience on microwave circuit and measurement. The plan is for each student to use ADS and generate a Gerber file for the vendor. To keep things simple, the FR4 would only have top/bottom copper layer, if possible without vias. This is my question: can you suggest the name of a vendor that can support fabrication of individual PCBs at competitive prices? I have never interfaced directly with vendors and I do not have a sense of who can do a good job for me. Also, my challenge is to fabricate individual PCBs (7 to be precise) rather than 10's or 100's copies of the same layout. Thank you in advance for your suggestions. Regards, Luciano ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu