Hi Jeff,
CCN sells the Probe Ranger series of probe stations with brackets for microwave
and scope probes (ask for the Steady Probe).
There is also vacuum base option, but no joystick control.
Very repeatable and cost effective.
This is the former line of Front Range Probe Stations products.
www.ccnlabs.com/probestations
—Don
On Dec 10, 2016, at 12:26 PM, Loyer, Jeff (Redacted sender "jwloyer" for
DMARC) <dmarc-noreply@xxxxxxxxxxxxx> wrote:
I'm looking to probe some 200MHz differential signals and won't be soldering
the connections but want to be able to hold the probe solidly against a
vertical board. I can't find what I'm used to on the web - any suggestions?
Features that I'm looking for:
1) Easy attachment to o'scope probe (P7500 tri-mode probes)
2) Easy coarse and fine adjustment. Coarse adjustment by manually
positioning the articulating arm and then locking it with an adjustable
tensioner. Fine adjustment by manipulating a joystick, though this often
didn't work well and we usually ended up getting it good enough with the
coarse adjustment.
3) Heavy base, or one with vacuum.
Thanks in advance for your help,
Jeff Loyer
Signal Integrity Lead
Amazon Web Services (AWS)
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu