Hi All,
We're using Cadence PCB Designer for our Layout design. Wherever we're doing
length matching we're considering the Pin delay information of controller
(Driver). My question is that, as all the timing parameters are defined at the
pin what is the necessity of considering pin delay for length matching. Kindly
share your opinions.
Regards,
Kishore Kumar
::DISCLAIMER::
----------------------------------------------------------------------------------------------------------------------------------------------------
The contents of this e-mail and any attachment(s) are confidential and intended
for the named recipient(s) only.
E-mail transmission is not guaranteed to be secure or error-free as information
could be intercepted, corrupted,
lost, destroyed, arrive late or incomplete, or may contain viruses in
transmission. The e mail and its contents
(with or without referred errors) shall therefore not attach any liability on
the originator or HCL or its affiliates.
Views or opinions, if any, presented in this email are solely those of the
author and may not necessarily reflect the
views or opinions of HCL or its affiliates. Any form of reproduction,
dissemination, copying, disclosure, modification,
distribution and / or publication of this message without the prior written
consent of authorized representative of
HCL is strictly prohibited. If you have received this email in error please
delete it and notify the sender immediately.
Before opening any email and/or attachments, please check them for viruses and
other defects.
----------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
