Hi, I'm looking at trying to model a SerDes with pre-emphasis in IBIS using a driver schedule approach. My signal has 4 levels: high-high, med-high, med-low, and low-low. The output is CML. My question is how do I extract the correct IBIS data for each level? For example, how do I get the I/V data for just the high-high state? The pre-emphasis is only for one bit period. Would I use a long clock so it stays high-high long enough to get the data? Any examples, articles, info would be appreciated. Regards, Tim ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu