[SI-LIST] ICX problem with part model load and no pin model

  • From: <marko.pulli@xxxxxxxxx>
  • To: <si-list@xxxxxxxxxxxxx>
  • Date: Fri, 15 Feb 2002 20:53:27 +0200

Hi all,

I'm having problems when loading a part model into ICX.

What could be the reason when no pin models appear on pin
model column after a part model has been loaded?
When probing a net on this pin it will show higher steady state output =
than VCC and also lots of over/under shoot :-)

It works ok and I get meaninful results if I load a pin model separately =
for each pin.
I think ICX should do this automatically but I'm doing something wrong =
here..

        -Marko
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                //www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: