Does anyone know tools available from third party to simulate PCB designs from Mentor; on both platforms Design Architect (workstation) or Expedition (PC) ? Daniel Paradis Staff Electrical Engineer Digital Subscriber Networks Scientific-Atlanta, Inc. 5030 Sugarloaf Parkway, ATL 1.3468 Lawrenceville, GA 30042 Tel: (770) 236-7896 Fax: (770) 236-2449 - - - - - - - Appended by Scientific-Atlanta, Inc. - - - - - - - This e-mail and any attachments may contain information which is confidential, proprietary, privileged or otherwise protected by law. The information is solely intended for the named addressee (or a person responsible for delivering it to the addressee). If you are not the intended recipient of this message, you are not authorized to read, print, retain, copy or disseminate this message or any part of it. If you have received this e-mail in error, please notify the sender immediately by return e-mail and delete it from your computer. ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu