Zero FEXT does not mean zero NEXT or zero noise coupling. Steve. On 3/20/2015 2:55 AM, 163 wrote: > Sorry for the messy code. Have no idea what happened. Resent this email... > > Hi experts, > > It's known that compared with microstrip, an added benefit of stripline > routing is zero far-end crosstalk (FEXT) because of a uniform Er surrounding > the signal traces. However, the Hyperlynx simulation results tell me > otherwise. > > I use Hyperlynx to simulate 5 stripline parallel signals (4 aggrs +1 victim) > using point to point topology. The aggressor drivers are toggling > simultaneously (all in phase) and the victim driver is stuck at high (let's > say 1.2V). > > Theoretically the victim receiver should also stuck at high at 1.2V. However > the Hyperlynx simulation results show that there is noise coupled to the > victim receiver and the noise is related to the distance to the adjacent > signals. Is my simulation wrong? > > Thanks and regards, > Amanda > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List forum is accessible at: > http://tech.groups.yahoo.com/group/si-list > > List archives are viewable at: > //www.freelists.org/archives/si-list > > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > -- Steve Weir IPBLOX, LLC 1580 Grand Point Way MS 34689 Reno, NV 89523-9998 www.ipblox.com (775) 299-4236 Business (866) 675-4630 Toll-free (707) 780-1951 Fax All contents Copyright (c)2015 IPBLOX, LLC. All Rights Reserved. This e-mail may contain confidential material. If you are not the intended recipient, please destroy all records and notify the sender. ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu