Hi Gurus I am trying to plot the Z-parameters for a simple 2 layer powerplane structure with Length of the sides of rectangular powerplanes = 10000 mils X 100 mils Dielectric separation between power planes = 10 mils My results seem to be inconsistent with other tools. Is there some mesh setting to be done in HFSS since aspet ratio here is pretty high? Any suggestions are appreciated. Thanks --------------------------------- Yahoo! India Matrimony: Find your partner now. ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu