Dear SI-LIST members I am doing some HSPICE simulations with a distributed RLC model for a bus. I want to measure the delay and the noise due to crosstalk in the bus lines. Can i do that with the .measure command in HSPICE ? Bear in mind that i am running simulations for long patterns (about 1000 bits data). Can ".measure" give me the maximum or the average delay in each bus line ? If not then is there any other way to do that, or do i have to make my own programm ? I know that it is easy to fing the min and the max voltage values, but can i measure spikes and ringing as well ? Please help !!! Thank you. ____________________________________________________________ Do You Yahoo!? Αποκτήστε τη δωρεάν @yahoo.gr διεύθυνση σας στο http://www.otenet.gr ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu