Hello Manthos If I got you right, You need to measure the delay rise to rise and fall to fall for 1000 bits, when there are several lines to measure (bus) and then get the max min average etc. Yes there is a way of doing that: 1. Make a .subckt the include all the measurements you need for one bit in the bus. The subckt nodes like in and out will be the nodes to measure (like probe contacts). you can use excel to make such a file. 2. Call the subckt as many times as needed for the bus bits. 3. cut the data from the .lis file to an excel spreadsheet and make your analysis. example: .subckt meas_bit in out .maesure tran bit_1 trig V(in) Val=1.5 cross=1 + targ V(out) Val=1.5 cross=1 .maesure tran bit_2 trig V(in) Val=1.5 cross=2 + targ V(out) Val=1.5 cross=2 . . . .ends xmeas_data_1 data_drv_1 data_rcv_1 meas_bit xmeas_data_2 data_drv_1 data_rcv_2 meas_bit In this example data_drv_1 is the driver of data 1 and data_rcv_1 is the receiver of data 1. Hope that help. -- Regards Itzik Peleg Board Technology Group ** PLEASE NOTE NEW PHONE AND FAX NUMBERS ** Marvell Semiconductor Israel Ltd Moshav Manof, D.N. Misgav 20184, ISRAEL Email - itzik.peleg@xxxxxxxxxxxxxx Tel - +972 4 9951192 Cell - +972 54 452482 Fax - +972 4 9951902 WWW Page: http://www.marvell.com ======================================================================== This message may contain confidential, proprietary or legally privileged information. The information is intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by telephone, or by e-mail and delete the message from your computer. Thank you! ======================================================================== ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu