[SI-LIST] HDMI
- From: "Ched-Chang Chai" <ched_chang@xxxxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Tue, 13 Jan 2004 13:11:21 +0800
Dear all,
I have HDMI connections from IC to connector through a common-mode choke.
HDMI differential signals requires Zdiff = 100ohm+/-15%.
I am wondering if this Zdiff = 100ohm+/-15% is for bare board or for
effective impedance (after mounting the IC, choke and connector)?
How to include the loading effects of IC, choke and connector in Zdiff
calculation?
Please advise.
Thank you very much in advance.
--
Regards,
Chai
_________________________________________________________________
Using a handphone prepaid card? Reload your credit online!
http://www.msn.com.my/reloadredir/default.asp
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
