[SI-LIST] FER Test Vs BER Test in SATA
- From: "Dhamija Naresh-B07930" <nareshd@xxxxxxxxxxxxx>
- To: <si-list@xxxxxxxxxxxxx>
- Date: Sat, 26 May 2007 01:09:24 +0530
=20
Hi All,
While doing FER (Frame Error Rate) Testing for Serial ATA Interface, I
came across some max. FER no. allowed.=20
Can I use BER Tester for measuring this by multiplying my whole max.
FIS(Frame Information Structure) with the no. of bits contained in FIS.
Regards
Naresh
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
