Hi,
Is this material absorb moisture quickly than other material?
So may be stock this material will be avoided.
Regards,
Mervin
On 11/5/2015 6:51 AM, Qin, Zhen Shui (Coriant - CN/Shanghai) wrote:
Hi Julia,
I think you can direct contact the vendors for the availability of materials,
they will be very happy to help you on that. For Megtron-6, the lead time is
about a month in China, while much shorter for the (G) version since they
were produced in Guangdong, China.
It is obviously that these two materials are different level materials, you
can get this conclusion just from their datasheets.
As for your specified case, a simulation is highly recommended before you
make your decision.
Best Regards,
Bruce
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On
Behalf Of Julia Gillard
Sent: Tuesday, November 03, 2015 7:13 PM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Experiences with Nelco N4000-13 EPSI
Hi :)
Anyone with experiences in designing with Nelco N4000-13 EPSI materials?
(Datasheet - http://www.parkelectro.com/parkelectro/images/n4000-13ep.pdf)
Looking at this material for short 28G chip to chip applications.
Is this a popular material? How is the availability of this material at board
shops in China?
The cost is significantly lower than Megtron-6. Other than lower loss, are
there any advantages of Megtron-6 vs this Nelco N4000-13 EPSI?
Any other alternatives I should consider?
Cheers,
Julia
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu