[SI-LIST] Re: Element Patterns
- From: "D G" <dgun@xxxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Sat, 31 Jan 2004 06:02:28 +0800
I'm sure momentum can do this for you, but I doubt you can get this from the
distributed models. In the layout window, after performing a momentum
simulation, select Momentum->Post-Processing->Radition Pattern.
--
Daniel
From: "neilmallik" <neilmallik@xxxxxxxxxxx>
> Hi all,
>
> I was wondering if anybody knew how to extract information from ADS
> in order to calculate the element pattern of a microstrip patch
> antenna. The total point of this is to determine the radiation
> pattern. I am designing an array of patches, which should radiate
> with minimum sidelobes, high gain and is broadside. This is
> incorporated in the array factor, which I have already implemented on
> MATLAB. I know that the radiation pattern can be calculated from the
> product of element pattrn and the array factor.
>
> If anybody knows how to determine the Element Pattern from ADS have
> any useful information for me, please contact me.
>
> Thank you.
>
> Regards,
>
> Neil.
--
___________________________________________________________
Sign-up for Ads Free at Mail.com
http://promo.mail.com/adsfreejump.htm
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
