[SI-LIST] Re: Dielectric Constant - thin materials - DC to 10GHz
- From: "Haddadin, Farah" <Farah.Haddadin@xxxxxxxxx>
- To: <si-list@xxxxxxxxxxxxx>
- Date: Mon, 1 Dec 2003 10:51:19 -0600
Hello everyone,
I am looking for a fixture that is capable of measuring permittivity of
thin materials from DC - 10GHz. There are two issues here:
1) The wide band of frequency: do I have to create two fixtures: one
for low frequency and one for high?
2) The thickness of the material to be tested: I was told that the
thickness of the material should roughly be: 20/sqrt(Er) [mm]. For
example, for a permittivity of 4, the thickness of the material under
test should be 10 mm. This is a conservative thickness estimator, but
the thickness of the materials of my interest is 0.1mm - 1mm.
I would greatly appreciate it if someone can point me to an existing
fixture or methodology to test such thin materials for the frequency
range mentioned above. Also, is there any reading material on the web
on how to create fixtures?
Thank you,
Farah
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
