Hi All, What is the best way to probe the DDR Signals on SODIMM?Is there any readymade solution(in terms of Connectors) available to probe the DDR SODIMM signals? I am facing issue in probing the signals on SODIMM as the via's are very small and moreover it becomes difficult to hold the probes on these vias. In my attempt I have used some wire straps with Damp Resistors and soldered them on the vias.But just want to understand if there is some other better way to do this. Thanks & Regards, Rajeev Sharma ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu