Bob, I think transfer impedance should be: Z12 = 25 * 10 ^ (S21/20), thus for S21 = -60dB, you have Z12 = 0.025 ohm. Regards Perry Bob Patel wrote: > Hi! The formula for conversion from ohm to dB is : > Ztrans=25*10^(|S21|/20). > So if S21=-60dB then Ztrans=25000, what is this value > in i.e. units is in ohm but do I need to divide it > with some factor to get in ohms. > I am trying to convert and it is not corelating. > Any inputs appreciated. > Thanks > Bob > > __________________________________ > Do you Yahoo!? > Yahoo! SiteBuilder - Free, easy-to-use web site design software > http://sitebuilder.yahoo.com > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > List archives are viewable at: > //www.freelists.org/archives/si-list > or at our remote archives: > http://groups.yahoo.com/group/si-list/messages > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > -- Perry Qu Design & Qualification | 600 March Road Alcatel Canada | Ottawa, ON K2K 2E6, Canada DID: (613) 7846720 | FAX: (613) 5993642 ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu